High Speed SAS / SATA Hard Disk and SSD Duplicator – MTS-SAS Series

Model	MTS400SAS	MTS800SAS	MTS1600SAS
Target	1 to 7	1 to 15	1 to 23

Description

U-Reach MTS-SAS series is a professional HDD/SSD duplicator, specially designed for high volume duplication. U-Reach adopted a unique multitasking technology that can simultaneously copy 15 HDD targets with a high transfer speed of 18 GB per minute. We guarantee the highest productivity without speed degradation, even as the number of targets increase. The MTS-SAS series SAS HDD duplicator provides four copy modes: quick smart copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. The quick copy mode copies data and skips blank area. NTFS, Linux (Ext2/Ext3/Ext4), FAT (16/32/exFAT), and Mac (HFS, HFS+, HFSX) formats are all supported with quick copy mode. In addition, the MTS-SAS duplicator is equipped with different levels of erase functions, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.

4 Copy Modes

	Quick Copy	The duplicator automatically copies only the data area, supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX).
	Whole Media	The duplicator copies from the initial sector to the end, bit-by-bit.
	All Partitions	The duplicator copies all the partitions and skips undefined area.
	Percentage	Sets percentage of source capacity to copy.

Transfer Speed

U-Reach MTS-SAS duplicators copy up to 18 GB/min on all devices simultaneously, without any speed degradation as the number of targets increases.

Verification of Data Integrity

Copies are straightforward, but it is imperative that the copied data are verified through a bit-by-bit process to ensure successful copies.

Optional Adapters Supported

Support All types of SATA interface via different adapters.

Skip Bad Sectors

End-users are given options to skip bad sectors from the source device.

Modular Cable Design

When cables wear out, users can quickly swap them out, saving time and money.

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards Secure erase functions wipe drive contents within seconds.

Event Log Report

U-Reach Log Report records the operation results and other information of each devices completely. It is an important asset for production management and analysis.

Models	MTS400SAS / MTS800SAS / MTS1600SAS
Specifications
	Max. Transfer Speed	18 GB/min. (300 MB/sec.) *Actual performance is dependent on device transfer rate.
	Supported Formats	All Partitions/Whole HDD/Percentage: copies all types of formats, both known and unknown.
		Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/3/4).
	Operating Type	Stand-alone, non PC-based operation
	Language Support	English, Japanese
	LCD Display	Backlit Monochrome LCD Display
	LEDs	3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail)
	Control Panel	4 Push Buttons (▲, ▼, OK, ESC)
Features	Copy Modes	Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
	Skip Bad-Sectors	Manually set (Bad sector) threshold range to skip during copy and erase process.
	Compare Function	Bit-for-bit data comparison.
	Sanitization Modes	Quick Erase, Full Erase, DoD Erase, and Secure Erase
Special Features	PC Monitoring	Real-time status monitoring through PC.
	Log Report Management	Monitor real-time recordings and Log Reports via PC-Link.
		Event log reports are generated through the USB port and saved to USB devices.
Compatibilities	OS Supported	All (Windows, Linux, and other stand-alone systems)
	Compatible Interfaces	w/o Adapters	1.8″/2.5″/3.5” SAS / SATA HDDs and SSDs
		w/ Adapters	IDE, microSATA, mSATA, eSATA, SATA M.2(NGFF) and CFast
	Advanced Formats	Supports MBR, GPT, and advanced formats.
Hardware Specifications	Power Supply	Selectable Voltage 115V or 230V, 50/60Hz
	Temperature Range	Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F) Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)
	Humidity Range	Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95%
	Certification	FCC, CE, RoHS

**Specifications subject to change without notice.

Function List for MTS-SAS Series
1. Copy
2. Compare
3. Copy +Compare
4. Erase	1. Quick Erase
	2. Full Erase
	3. DoD Erase
	4. DoD EraseComp
	5. 7-Pass Erase
	6. Secure Erase
	7. Enhanced Secure Erase
	8. NSA Erase
	9. US Army AR 380-19
	10. BMB21-2007
	11. Sanitize Block Erase
	12. Sanitize Purge
5. Utility	1. Show Disk Info.
	2. Update System
	3. System Info.
6. Setup	1. Start-up Menu
	2. Copy Area	System and Files
		ALL Partitions
		Whole HDD
		Percentage (%)
	3. Copy GPT Backup Area
	4. Skip Errors
	5. Minimum Speed
	6. Check Source Minimum Speed
	7. Language
	8. Delete Disk Signature After Copy
	9. Advanced Setup	1. Unknown Format
		2. Erase Master
		3. Erase Pattern
		4. Skip Erase Errors
		5. Wait HDD Time
		6. Timeout Time
		7. Timeout Retry
		8. Lock Key
		9. Copy HPA Area
		10. Clear HPA at ERASE
		11. Mark After Erase
		12. Transfer Rate
		13. Stop Motor Time
		14. Verify After Erase
	10. Restore Default
7. Log Manager	1. Out Today Report
	2. Out Recent Report
	3. Out Period Date
	4. Advanced Function	1. Clear ALL Log
		2. Setup Password
		3. Adjust Clock
		4. Add Watermark at text File