SAS / SATA Hard Disk and SSD Sanitizer (Data Eraser) – SA330

SAS / SATA Hard Disk and SSD Sanitizer (Data Eraser) – SA330

Model SA330
Target 4 ports

5 Data Sanitization Functions: Full erase, DoD erase and Secure erase, comply with NIST SP 800-88r1 and DoD 5220-M Standards.

Log report records detail of all erase tasks  for audit purpose.

Free licensing, no extra cost per erase.

Supports 2.5″, 3.5″ SATA HDD / SSD and IDE HDD via IDE_SATA convertor. (IDE to SATA adapter-TB1529 is optional)

Supports multiple HDD / SSD interfaces with its open platform design.

Fast Erase Key enables the end-user to perform erase functions asynchronously.

Description

Sanitize Functions

Full Erase
(1-Pass Overwrite)
 Erases entire device(s), complying with NIST SP 800-88r1 (Clear) Standards.
DoD Erase
 Erases device(s), complying with DoD 5220.22-M Standards.
DoD Erase + Compare
 Erases device(s), complying with DoD 5220.22-M Standards and verifies complete erasure.
7-Pass Erase
 Erases device(s) 7 times complying with DoD 5220.22-M(ECE) Standards.
Secure Erase
 Erases the non-loadable areas complying with NIST SP 800-88r1 (Purge) Standards.

Skip Bad Sectors

End-users are given options to skip bad sectors during erasing device(s).

Skip bad Sectors

Event Log Report

The Log Report for SA330 SAS Sanitizer records all detail information of erase job and easy to output and store by an USB pen drive. It is an important tool for audit purpose.

Eraser-log

Optional Adapters Supported

SA330 DATA Eraser supports all types of SATA interface via different adapters.

MTSAS-adapters

 

Copy Functions

Quick Copy
Quick Copy
Automatically copies only the data area:
  • Windows (FAT16/32/exFAT/NTFS)
  • Linux (ext2/ext3/ext4/LVM)
  • Mac (HFS/HFS+/HFSX).
Whole Media
Whole Media
 The duplicator copies from the initial sector to the end, bit-by-bit.
All Partitions
All Partitions
 The duplicator copies all the partitions and skips undefined area.
Percentage Copy
Percentage
 Sets percentage of source capacity to copy.

download

Models SA330
Specifications
Max. Transfer Speed 30 GB/min. (500 MB/sec.)
*Actual performance is dependent on device transfer rate.
Operating Type Stand-alone, non PC-based operation
Language Support English, Japanese
LCD Display Backlit Monochrome LCD Display
LEDs 3 LED Indicators per Port:
Yellow (Power), Green (Pass), Red (Fail)
Control Panel 4 Push Buttons (▲, ▼, OK, ESC)
Features Sanitization Modes Full Erase, DoD Erase, Secure Erase and 7-Pass Erase
Skip Bad-Sectors Manually set (Bad sector) threshold range to skip during erase and copy process.
Erase Certificate Erase logs generated through the USB port and saved to USB devices.
Special Features Copy Modes Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy
Compare Function Bit-for-bit data comparison.
Compatibilities OS Supported All (Windows, Linux, and other stand-alone systems)
Compatible Interfaces w/o Adapters SAS HDDs and SATA HDDs / SSDs
w/ Adapters IDE, microSATA, mSATA, eSATA, SATA M.2(NGFF) and CFast
Advanced Formats Supports MBR, GPT, and advanced formats.
Hardware

Specifications

 Power Supply Selectable Voltage 115V or 230V, 50/60Hz
Temperature Range Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)
Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)
Humidity Range Working Humidity: 20% ~ 80%
Storage Humidity: 5% ~ 95%
Certification FCC, CE, RoHS

**Specifications subject to change without notice.

User Guide

Function List for SA330
1. Copy
2. Compare
3. Copy +Compare
4. Erase 1. Quick Erase
2. Full Erase
3. DoD erase
4. DoD EraseComp
5. 7-Pass Erase
6. Secure Erase
7. Enhanced Secure Erase
5. Utility 1. Show Disk info
2. Update system
3. System Info
6. Setup 1. Start-up Menu
2. Copy Area System and Files
All Partitions
Whole HDD
Percentage (%)
3. HPA Copy Mode
4. Skip Bad Sectors
5. Erase Master
6. Unknow Format
7. Erase Pattern
8. Clear HPA at Erase
9. Mark After Erase
10. Language
11 Restore Default
7. Log Manager 1. Out Today report
2. Out Recent report
3. Out Period Date
4. Advanced Function 1. Clear All Logs
2. Password Setup
3. Adjust Clock
4. Add Watermark at text File
8. Burn-in 1. Run Burn-In
2. Set Burn Time
3. Set Loop Count
4. Set Test Range
5. Set Bad Limit
6. Set Read Count Per Loop
7. Ser Power Off Second Between Loop
8. Set Power Off Between Write And Read

HDD and SSD Eraser Comparison Chart(IN)_20220427

X
× How can I help you?