SAS / SATA Hard Drive and SSD Sanitizer (Data Eraser) – GT Series

SAS / SATA Hard Drive and SSD Sanitizer (Data Eraser) – GT Series

Model A1
Target 1 to 3

Maximum copying speed of one single port can be up to 16GB/min.

Supports bit-by-bit copy for all formats, including proprietary and unknown formats.

Compatible with the USB drive 2.0/3.0/3.1.

Light weight and portable design.

In-built H2 and H5 Read/Write speed inspection.

Read/Write speed inspection/Actual capacity inspection/ Bad sector inspection

Description

U-Reach A1(U3104) is the best portable 1 to 3 USB3.2 Drive Copier. Its lightweight design and friendly interface allows easy operation for personal, office and shop applications. Just plug in your master USB device in the source port, target device in the target ports, and press “OK”, it will execute copy.

The unit is an FPGA-based, standalone design which means no need PC support or any installation procedures. When the system is turned off, no data is left in it, so there is no risk of virus infection. While switching on and off, it quickly boots up and shuts down, saving time for operation.

Besides copy, the A1 quickly checks Flash device quality as well. The checking capability assists with identifying which Flash devices are defective. H2test and H5 test enables you to find out the real capacity of a Flash device and check each Flash device’s reading and writing speed.

Copy Anywhere

Amazing compact form factor allow user to go anywhere & copy anywhere!

Sensible Control

Simple yet smart easy control for all age group.

 

Superb Versatility

UB300 supports all USB Brand! Carry Series allow you to copy confidently!

 

2 Kinds of Copy Modes

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards.

Sanitization Functions-2

Flash Quality Checking Functions

Standard Package

download

Models A1
Specifications
Max. Transfer Speed 16 GB/min. (266 MB/sec.)
*Actual performance is dependent on device transfer rate.
Supported Formats Whole Media: copies all types of formats, both known and unknown.
Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4).
Operating Type Stand-alone, non PC-based operation
Language Support English, Japanese
LCD Display Backlit Monochrome LCD Display
LEDs 2 LED Indicators per Port:
Green (Pass), Red (Fail)
Control Panel 4 Push Buttons (▲, ▼, OK, ESC)
Features Copy Modes Quick Copy (System and Files), Whole Media
Compare Function Bit-for-bit data comparison.
Diagnostic Modes USB 2.0/ 3.2 signal detection
H2 read/ write test
H5 read/ write test
Format Function Formats device to FAT16 or FAT32.
Sanitization Modes Quick Erase, Full Erase and DoD Erase
Compatibilities Direct Supported Device USB 2.0/ 3.1/ 3.2 pen drive(s)
Require Adapters to Support SD card; CF card.
Supported OS All (Windows, Mac, Linux, and other stand-alone systems).
Hardware

Specifications

Power Supply 12V DC Adapter
Temperature Range Operating Temperatures: 0°C ~ 60°C
Storage Temperatures: -20°C ~ 85°C
Humidity Range Working Humidity: 20% ~ 80%
Storage Humidity: 5% ~ 95%
Certification FCC, CE, RoHS

**Specifications subject to change without notice.

User Guide

Function List for A1
*Set “Working Mode” to “Duplicator.”
1. Copy (Data)
2. Compare
3. Copy+Compare
4. Do Format 1. Auto Format
2. FAT16 Format
3. FAT32 Format
4. set FAT16 Cluster Size
5. set FAT32 Cluster Size
5. Erase 1. Quick Erase
2. Full Erase
3. DoD Erase
6.Utilities 1. USB Info.
2. System Info.
3. System Update
7. Setup 1. Copy Area System and Files
Whole Media
2. Copy GPT Backup Area
3. Button Sound
4. Active USB Revision
5.Check USB Signal Before Copy
6. Target Tolerance
7.Asynchronous
8. Power off Time Between Copy+Compare
9. Language
10. Erase Master Port
11. Skip Source Bad Sectors
12. Delete Disk Signature After Copy
13. Set to Default
8. Working Mode Duplicator
Tester
*Set “Working Mode” to “Tester.”
1. Media Check 1. H2(KeepFormat)
2. H2(Keep Data)
3. H2(Overwrite)
4. H5(KeepFormat)
5. H5(Keep Data)
6. H5(Overwrite)
7. Setup Range %
8. Set ErrorLimit
9. Minimum Read Speed
10. Setup Range MB
11. Minimum Write Speed
12. Set Capacity Limit
13. PreCheck USB Signal
2. Signal Detection 1. USB2 and USB3
2. Only USB3
3. Only USB2
3. Measure Speed
4. Do Format 1. Auto Format
2. FAT16 Format
3. FAT32 Format
4. set FAT16 Cluster Size
5. set FAT32 Cluster Size
5.Utilities 1. USB Info.
2. System Info.
3. System Update
6. Working Mode Tester
Duplicator
X
× How can I help you?