USB 3.0 Pen Drive Duplicator -Intelligent U3 Golden Series

Model	UB3908G3	UB3916G3	UB3924G3
Target	1 to 7	1 to 15	1 to 23
Model	UB3932G3	UB3940G3	UB3948G3
Target	1 to 31	1 to 39	1 to 47

Description

U-Reach Intelligent U3 Series is a professional USB device duplicator, specially designed for high volume duplication. It is adopted a unique multitasking technology that can simultaneously copy up to 47 USB devices with a high transfer speed of 10 GB per minute. It’s compatible with variety of USB 2.0/3.0/3.1/3.2 devices and supports USB hard drives with additional power adapters.

2 Copy Modes

	Quick Copy	The duplicator automatically copies only the data area, supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX).
	Whole Media	The duplicator copies from the initial sector to the end, bit-by-bit.

Transfer Speed

Highest speed USB Duplication /Inspection Equipment in the industry. Maximum copying speed of one single port can be up to 10GB/min. Speed-10

Swappable Modular Sockets

The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient. swappable socket-U3

USB Signal Detection

Just 3 seconds needed to read the signal of 2.0/3.1 USB device. signal detect-U3

Quality Testing / Checking Functions

H2 test	Overwrites the same value as H2testw to all sectors in the NAND flash, and verifies them to determine quality.
H5 test	Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality.

Once the testing process completes, the inspector will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed.

Optional Accessories for Supporting USB Hard Drive(s)

1. Additional Power Adapters. 2. Cooling Brackets. High speed transmission may cause storage media to generate heat during the process of duplication. It’s advised to use cooling brackets for those storage media to stabilize the copy performance. Cooling Brackets-U3

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards. Sanitization Functions-2

Mass Duplicate Write-protected USB Pen Drives

Requires W-Mode USB sticks to reach write-protected function. Easy 2 steps to copy data into USB sticks and set the whole area of Nand Flash to write-protected. After setting, the USB stick will become anti-format and the data become non-deletable.

Real-Time Monitoring

Monitor real-time status via PC through USB cable link. PC monitor-U3

Event Log report

The U-Reach Golden Series duplicator provides an essential tool for production quality remote control and yield analysis. It records the operation results and other information of each device completely. log-U3

Models	UB3908G3 / UB3916G3 / UB3924G3 / UB3932G3 / UB3940G3 / UB3948G3
Specifications
	Max. Transfer Speed	10 GB/min. (166 MB/sec.) *Actual performance is dependent on device transfer rate.
	Supported Formats	Whole Media: copies all types of formats, both known and unknown.
		Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4).
	Operating Type	Stand-alone, non PC-based operation
	Language Support	English, Japanese
	LCD Display	Backlit Monochrome LCD Display
	LEDs	2 LED Indicators per Port: Green (Pass), Red (Fail)
	Control Panel	4 Push Buttons (▲, ▼, OK, ESC)
Features	Copy Modes	Quick Copy (System and Files), Whole Media
	Compare Function	Bit-for-bit data comparison.
	Diagnostic Modes	USB 2.0/ 3.2 signal detection
		H2 read/ write test
		H5 read/ write test
	Format Function	Formats device to FAT16 or FAT32.
	Sanitization Modes	Quick Erase, Full Erase and DoD Erase
Special Features	PC Monitoring	Real-time status monitoring through PC
	Log Report Management	Event log reports are generated through the first port and saved to the USB device.
	Write Protect	Requires W-mode USB sticks to reach whole USB write-protected.
Compatibilities	Direct Supported Device	USB 2.0/ 3.1/ 3.2 pen drive(s)
	Require Adapters to Support	external USB-HDD (USB hard drive); SD card; CF card.
	Supported OS	All (Windows, Mac, Linux, and other stand-alone systems).
Hardware Specifications	Power Supply	12V DC Adapter
	Temperature Range	Operating Temperatures: 0°C ~ 60°C Storage Temperatures: -20°C ~ 85°C
	Humidity Range	Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95%
	Certification	FCC, CE, RoHS

**Specifications subject to change without notice.

Function List for Intelligent U3 USB3.0 Golden Series
1. Copy (Data)
2. Compare(Data)
3. Copy+Compare
4. Media Check	1. Signal+H2+Format
	2. H2+Format
	3. H2
	4. Signal+H5+Format
	5. H5+Format
	6. Setup Range %
	7. Setup Range MB
	8. Set ErrorLimit
	9. Minimum Read Speed
	10. Minimum Write Speed
	11. Low Speed Tolerance Time
	12. Set Capacity Limit
5. Signal Detection	1. USB2 and USB3
	2. Only USB3
	3. Only USB2
6. Utilities	1. Information	1. USB Info.
		2. System Info.
	2. Erase	1. Quick Erase
		2. Full Erase
		3. DoD Erase
	3. Do Format	1. Auto Format
		2. FAT16 Format
		3. FAT32 Format
	4. Calc. CRC64
	5. Calc. Hash MD5
	6. System Update
7. Setup	1. Start-up Menu
	2. Copy Area	System and Files
		Whole Media
	3. Copy GPT Backup Area
	4. Button Sound
	5. Active USB Revision
	6. Target Tolerance
	7. Asynchronous
	8. Power Off Time Between Copy+Compare
	9. Skip Source Bad Sectors
	10. Delete Disk Signature After Copy
	11. Check VID/PID
	12. Language
	13. Select Speed
	14. Active Hash
	15. Minimum Speed
	16. Check USB Signal Before Copy
	17. Set to Default
8. Log Manager	1. Out Today Report
	2. Out Recent Report
	3. Out Period Date
	4. Advanced Function	1. Clear ALL Log
		2. Setup Password
		3. Adjust Time/Date
9. Write Protect	1. Copy+WriteProtect
	2. Copy+Comp+WriteP.
	3. Set Write Protect
	4. Set Write Enable
	5. Show USB WP Info