USB 3.0 Pen Drive Inspector -Intelligent U3 Golden Series

Model	UB3908G3	UB3916G3	UB3924G3
Target	1 to 7	1 to 15	1 to 23
Model	UB3932G3	UB3940G3	UB3948G3
Target	1 to 31	1 to 39	1 to 47

Description

The quality of flash memory on the market varies greatly. It does not matter if you are a buyer or seller of pen drives, you would need an efficient way to exam/ sort out the quality level of USB devices. H2 was the most commonly applied examination software for the industry in the past. H2 can exam the USB drives/memory cards one by one on a PC but with low efficiency. The stability of H2 test is affected by copy quantity and process ability of PC. U-Reach provides various Quality Examinations to satisfy any need of quality checking. Our solution applies multi-core transfer technology. Thus, you can use the same amount of time to exam batch of flash memory, which greatly improves QC performance.

H2 Test

The H2 test runs test from sector 0 to the last sector by writing and reading. The test pattern is the same as H2testw. Besides, below information will be acquired after examination: 1. The quantity of bad sectors. 2. Filter out devices below write/read speed standard. 3. Filter out devices below bad sector standards. 4. Display the REAL capacity.

H5 Test

The H5 test runs writing and reading test from LBA 0 to the last. During testing, devices are able to set up standards for examination. 1. Minimum read/write speed. 2. The bad-sector tolerance. 3. Range of examination on device. 4. Capacity tolerance.

USB 3.0 Signal Detect

All the USB3.0/3.1 pen drives are downward compatible with USB2.0. It increases the difficulty of distinguishing real USB3.0 signal. U-Reach Intelligent U3 Series offers a quick checking tool, check out the real signal of your pen drives in 5 seconds. signal detect-U3

Quality Check Report

Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole quality checking process. It records all details of each task. For example, checking function, working time, model number, serial number of media, read speed and write speed, results…etc. To provide log report as a quality proof is capable to increase the value and trust of the dealing goods.

Swappable Modular Sockets

The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient. swappable socket-U3

Models	UB3908G3 / UB3916G3 / UB3924G3 / UB3932G3 / UB3940G3 / UB3948G3
Specifications
	Max. Transfer Speed	10 GB/min. (166 MB/sec.) *Actual performance is dependent on device transfer rate.
	Supported Formats	Whole Media: copies all types of formats, both known and unknown.
		Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4).
	Operating Type	Stand-alone, non PC-based operation
	Language Support	English, Japanese
	LCD Display	Backlit Monochrome LCD Display
	LEDs	2 LED Indicators per Port: Green (Pass), Red (Fail)
	Control Panel	4 Push Buttons (▲, ▼, OK, ESC)
Features	Copy Modes	Quick Copy (System and Files), Whole Media
	Compare Function	Bit-for-bit data comparison.
	Diagnostic Modes	USB 2.0/ 3.2 signal detection
		H2 read/ write test
		H5 read/ write test
	Format Function	Formats device to FAT16 or FAT32.
	Sanitization Modes	Quick Erase, Full Erase and DoD Erase
Special Features	PC Monitoring	Real-time status monitoring through PC
	Log Report Management	Event log reports are generated through the first port and saved to the USB device.
	Write Protect	Requires W-mode USB sticks to reach whole USB write-protected.
Compatibilities	Direct Supported Device	USB 2.0/ 3.1/ 3.2 pen drive(s)
	Require Adapters to Support	external USB-HDD (USB hard drive); SD card; CF card.
	Supported OS	All (Windows, Mac, Linux, and other stand-alone systems).
Hardware Specifications	Power Supply	12V DC Adapter
	Temperature Range	Operating Temperatures: 0°C ~ 60°C Storage Temperatures: -20°C ~ 85°C
	Humidity Range	Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95%
	Certification	FCC, CE, RoHS

**Specifications subject to change without notice.

Function List for Intelligent U3 USB3.0 Golden Series
1. Copy (Data)
2. Compare(Data)
3. Copy+Compare
4. Media Check	1. Signal+H2+Format
	2. H2+Format
	3. H2
	4. Signal+H5+Format
	5. H5+Format
	6. Setup Range %
	7. Setup Range MB
	8. Set ErrorLimit
	9. Minimum Read Speed
	10. Minimum Write Speed
	11. Low Speed Tolerance Time
	12. Set Capacity Limit
5. Signal Detection	1. USB2 and USB3
	2. Only USB3
	3. Only USB2
6. Utilities	1. Information	1. USB Info.
		2. System Info.
	2. Erase	1. Quick Erase
		2. Full Erase
		3. DoD Erase
	3. Do Format	1. Auto Format
		2. FAT16 Format
		3. FAT32 Format
	4. Calc. CRC64
	5. Calc. Hash MD5
	6. System Update
7. Setup	1. Start-up Menu
	2. Copy Area	System and Files
		Whole Media
	3. Copy GPT Backup Area
	4. Button Sound
	5. Active USB Revision
	6. Target Tolerance
	7. Asynchronous
	8. Power Off Time Between Copy+Compare
	9. Skip Source Bad Sectors
	10. Delete Disk Signature After Copy
	11. Check VID/PID
	12. Language
	13. Select Speed
	14. Active Hash
	15. Minimum Speed
	16. Check USB Signal Before Copy
	17. Set to Default
8. Log Manager	1. Out Today Report
	2. Out Recent Report
	3. Out Period Date
	4. Advanced Function	1. Clear ALL Log
		2. Setup Password
		3. Adjust Time/Date
9. Write Protect	1. Copy+WriteProtect
	2. Copy+Comp+WriteP.
	3. Set Write Protect
	4. Set Write Enable
	5. Show USB WP Info