USB Pen Drive Duplicator -Intelligent 9 USB Silver Series

Model	UB910S	UB920S	UB930S
Target	1 to 9	1 to 19	1 to 29
Model	UB940S	UB960S	UB9120S
Model	1 to 39	1 to 59	1 to 119

Description

U-Reach Intelligent 9 USB Series is a professional USB device duplicator, specially designed for high volume duplication. It is adopted a unique multitasking technology that can simultaneously copy up to 119 USB devices with 2 GB/min transfer speed. It’s compatible with variety of USB 2.0/3.0/3.1/3.2 devices and supports USB hard drives with additional power adapters.

2 Copy Modes

	Quick Copy	The duplicator automatically copies only the data area, supports Windows (FAT16/32/exFAT/NTFS), Linux (ext2/ext3/ext4/LVM), and Mac (HFS/HFS+/HFSX).
	Whole Media	The duplicator copies from the initial sector to the end, bit-by-bit.

Transfer Speed

Highest speed USB Duplication /Inspection Equipment in the industry. Maximum copying speed of one single port can be up to 2 GB/min.

2GB/min Trasnfer Speed

Swappable Modular Sockets

The handscrew attached faceplates and replaceable sockets make maintenance quick and convenient.

socket-In9

Change Socket-In9

Quality Testing / Checking Functions

H2 test	Overwrites the same value as H2testw to all sectors in the NAND flash, and verifies them to determine quality. After checking, the machine will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed.
H5 test	Overwrites machine-generated values to all sectors in the NAND flash, and verifies them to determine quality. After checking, the machine will show not only the test result but also Bad Sector Quantity, Read Speed and Write Speed.

Sanitization Functions

Erase Functionality Compliant with NIST SP 800-88r1 and DoD 5220-M Standards.

Sanitization Functions-2

Real-Time Monitoring

Monitor real-time status via PC through USB cable link.

PC Link-UB-S

Models	UB910S / UB920S / UB930S / UB940S / UB960S / UB9120S
Specifications
	Max. Transfer Speed	2 GB/min. (33 MB/sec.) *Actual performance is dependent on device transfer rate.
	Supported Formats	Whole Media: copies all types of formats, both known and unknown.
		Quick Copy: copies FAT16/32/exFAT, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (ext2/ext3/ext4).
	Operating Type	Stand-alone, non PC-based operation
	Language Support	English, Japanese
	LCD Display	Backlit Monochrome LCD Display
	LEDs	2 LED Indicators per Port: Green (Pass), Red (Fail)
	Control Panel	4 Push Buttons (▲, ▼, OK, ESC)
Features	Copy Modes	Quick Copy (System and Files), Whole Media
	Compare Function	Bit-for-bit data comparison.
	Diagnostic Modes	H2 read/ write test
		H5 read/ write test
		Capaccity Check
	Format Function	Formats device to FAT16 or FAT32.
	Sanitization Modes	Quick Erase, Full Erase and DoD Erase
Special Features	PC Monitoring	Real-time status monitoring through PC
Compatibilities	Direct Supported Device	USB 2.0/ 3.1/ 3.2 pen drive(s)
	Require Adapters to Support	external USB-HDD (USB hard drive); SD card; CF card.
	Supported OS	All (Windows, Mac, Linux, and other stand-alone systems).
Hardware Specifications	Power Supply	12V DC Adapter
	Temperature Range	Operating Temperatures: 0°C ~ 60°C Storage Temperatures: -20°C ~ 85°C
	Humidity Range	Working Humidity: 20% ~ 80% Storage Humidity: 5% ~ 95%
	Certification	FCC, CE, RoHS

**Specifications subject to change without notice.

Function List for Intelligent9-USB Silver Series
1. Copy
2. Compare
3. Copy&Compare
4. Media Check	1. H2 RW 100%
	2. H2+Format 100%
	3. H5 RW 100%
	4. Setup Range %
	5. Setup Range MB
	6. Set ErrorLimit
	7. Minimum Read Speed
	8. Minimum Write Speed
	9. Low Speed Tolerance Time
	10. Set Capacity Limit
	11. Set Loop Count
5. Information	1. USB Info.
	2. System Info.
6. Utility	1. Do Format	1. Auto Format
		2. FAT16 Format
		3. FAT32 Format
		4. exFAT Format
		5. set FAT16 Cluster Size
		6. set FAT32 Cluster Size
	2. Measure Speed
	3. Capacity Check
	4. Quick Erase
	5. Full Erase
	6. DoD Erase
	7. System Update
	8. Calc. CRC64
	9. A2 Fake Picker
7. Setup	1. Start-up Menu
	2. Copy Area
	3. Copy GPT Backup Area
	4. Button Sound
	5. Target Tolerance
	6. Asynchronous
	7. Check Before Copy
	8. Power Off Time Between Copy&Compare
	9. Auto Start After Fill Device
	10. Language
	11. Select Speed
	12. Set HDD Mode
	13. Monitor Device After Copy
	14. Minimum Speed
	15. Advanced Setup	1. LED in FactoryMode
		2. Erase Master Port
	16. Set to Default